This brand new, GENUINE WALBRO 525 LPH High Pressure in-tank fuel pump can support 1,000hp (at the crank) when supplied with 13.5V! This pump is the only high performance fuel pump on the market specifically designed for long term use in ANY type of fuel: E85, Ethanol, Alcohol or Gasoline.
You will receive one F90000285 525 LPH Fuel Pump and one 400-0085 installation kit. We include a universal kit with every pump containing exactly what is pictured, including the install/precaution instructions in English.
We purchase directly from the only Authorized Walbro High Performance Warehouse
Wholesale Distribution available, contact us for details and pricing!
The Walbro 525lph "turbine style" High-Pressure fuel pump is designed to meet the fuel-hungry demands of modern supercharger and turbo-charging enthusiasts. The Walbro 525lph High Pressure unit can flow close to the amount of dual in-tank pumps or large externals but in a small, convenient and surprisingly quiet package. This pump is a great solution for high fuel pressure turbocharged cars and anyone looking to make big power and run high boost with a simple fuel system where the 400lph won't suffice.
Walbro's turbine pump head uses two sets of turbine blades set in parallel on a common shaft (like a jet engine). This high efficiency pump design pressurizes the fuel as it flows through the pump axially without forcing the fluid to change direction - the end result is tremendous flow rates at a variety of different rail pressures and to suit various injector sizes.
This pump can flow anywhere from 0-100 psi, which is determined by your fuel pressure regulator. This is an aftermarket high performance fuel pump and modifications will be needed. If you receive the pump and have read the directions, but still have questions, please email us for install help. All of our pumps are always in stock and will often ship the day of payment.
Boosted applications that see higher fuel pressures can still make 1,000 hp with this pump, but not when over 100 psi because the fuel heats up and can cause problems. Also, a fuel pump can't pump when it doesn't get enough voltage. These pumps REQUIRE an aftermarket FPR, larger than stock fuel supply and return lines, upgraded 14 gauge or larger pump electrical wiring, a minimum 15 amp fuse, but likely a 20 amp fuse, and a good relay to support the high flow fuel pump properly.
Important information for the Walbro F90000285 fuel pump:
Specifically Designed for use in E85 or Ethanol
Designed for engines with more than 500hp
Award-winning OE technology
High-pressure, high-flow performance
Outperforms all current market in-tank fuel pumps
Requirements for installation:
Modification to wiring, fuel lines and fuel module
Upgraded Aftermarket Fuel Pressure Regulator
Larger Fuel Supply and Return Lines
14 Gauge or Larger Electrical Wiring
15 Amp Fuse, 20-25 Amp Recommended
Professional Installation Recommended
FULLY endorsed by Walbro for use in E85 fuel
Failure to follow the above noted suggestions while using this pump in a stock factory fuel system will cause severe drivability issues and could lead to damage of the vehicles fuel system.
Walbro Fuel Pump Specs:
Condition: 100% BRAND NEW
Overall Pump Length: 121mm
Main Housing Dia.: 39mm
Lower Housing Dia.: 50mm
Fuel Inlet Dia.: 11mm OD
Fuel Outlet Dia.: 11mm OD
Usage: In-tank Fit
Fuel Flow: 525+ Liters per Hour
Version: High Pressure
Installation Kit Included: Yes
MIN Voltage: 12V
Operating Pressure: 0-100 psi determined by fuel pressure regulator