Harland Sharp Small Block Mopar 7/8" Shaft Mount Roller Rocker Arms, 1.6 Ratio, for Edelbrock Victor / IndyBrock Heads

Harland Sharp Small Block Mopar 7/8" Shaft Mount Roller Rocker Arms, 1.6 Ratio, for Edelbrock Victor / IndyBrock Heads

Notes: Designed For Edelbrock Victor & IndyBrock Heads. Harland Sharp Mopar kits are for extreme applications. The 7/16-20 x 5/16 ball adjusters are designed for use with the factory style pushrods, length to be determined after you have rockers installed.

Specs:
Rocker Arm Mounting Style: Shaft
Self-Aligning: No
Rocker Arm Ratio: 1.6
Rocker Arm Style: Full roller
Shims Included: No
Rocker Arm Material: Aluminum
Rocker Arm Body Style: Standard
Rocker Arm Fasteners Included: No
Rocker Arm Finish: Orange anodized

Fits:
For Use With Edelbrock Victor / IndyBrock Heads

Kits includes:
Rocker arms, shafts, spacers, hold down clamps, adjusters and nuts, rocker shaft hold-downs.

Special Notes:
Harland Sharp SB Mopar kits require taller valves. Approximately .100-.150 are necessary for correct geometry but sometime lash caps can be used. Needle bearing allow for more oil flow to the rockers. Oil restrictors may be necessary to maintain oil pressure. Rockers are designed for big lift cams requiring .100 to .150 taller valves. Rocker shafts are drilled to allow for 3/8 mounting hardware. Rocker spring clearance is limited to 1.500 if more spring clearance is required, Designed Specifically for the Trickflow SB Mopar Head that uses pushrod oiling