Harland Sharp Small Block Mopar 7/8" Shaft Mount Roller Rocker Arms, 1.5 Ratio, for Indy 360-1 / 360-2k Heads

Harland Sharp Small Block Mopar 7/8" Shaft Mount Roller Rocker Arms, 1.5 Ratio, for Indy 360-1 / 360-2k Heads

Notes: Harland Sharp SB Mopar kits require taller valves. Approximately .100-.150 are necessary for correct geometry but sometime lash caps can be used.

Specs:
Rocker Arm Mounting Style: Shaft
Self-Aligning: No
Rocker Arm Ratio: 1.5
Rocker Arm Style: Full roller
Shims Included: No
Rocker Arm Material: Aluminum
Rocker Arm Body Style: Standard
Rocker Arm Fasteners Included: No
Rocker Arm Finish: Orange anodized

Fits:
Indy 360-1 / 360-2k Heads

Kits includes:
Rocker arms, shafts, spacers, hold down clamps, adjusters and nuts

Special Notes:
Harland Sharp Mopar kits are designed for extreme applications with valve springs up to 1.500 diameter and .900 lift cams. The 7/16-20 x 5/16 ball adjusters are designed for use with the factory style pushrods, length to be determined after you have rockers installed. Needle bearing allow for more oil flow to the rockers. Oil restrictors may be necessary to maintain oil pressure. Rockers are designed for big lift cams requiring .100 to .150 taller valves. Rocker shafts are drilled to allow for 3/8 mounting hardware. Rocker spring clearance is limited to 1.500