Harland Sharp SBC 7/16" Stud Mount Roller Heavy Duty Rocker Arms, 1.6 Ratio, for SBC With Offset Intakes (0.150 Offset)

Harland Sharp SBC 7/16" Stud Mount Roller Heavy Duty Rocker Arms, 1.6 Ratio, for SBC With Offset Intakes (0.150 Offset)

Notes: The pushrod cups have been moved .0150 to the left & right, on the intake rockers, so special guide plates will be needed. In some cases these rockers can cause damage, rather than make horsepower. It's always good to check with an engine builder before installing.

Harland Sharp offset roller rocker sets for SB Chevy are designed for use with aftermarket or heavily modified stock cylinder heads.

Specs:
Rocker Arm Mounting Style: Stud
Self-Aligning: No
Rocker Arm Ratio: 1.6
Stud Size: 7/16 in.
Maximum Spring Diameter (in.): 1.630 in.
Rocker Arm Style: Full roller
Rocker Arm Offset (Intake): 0.150 in.
Shims Included: No
Rocker Arm Material: Aluminum
Rocker Arm Body Style: Wide
Rocker Arm Fasteners Included: Yes
Rocker Arm Nut Style: Polylock
Slot Width (in.): 0.625 in.
Quantity: set of 16

Sets Include:
4 left offset intakes, 4 right offset intakes & 8 standard exhaust.

Picture #3 Explanation:
When ordering look at the rockers from the top (flat side up) with the roller towards you, the diagram shows how offsets are determined.