Alky Control GM Truck 99-07 2-Gallon Methanol Injection Kit

This is for 1999-2007 GM Truck and is designed to fit in the drivers front spare battery tray location of a GM truck. Features the 2 gallon Vortech tank with the addition of a low level float switch. For turbo/centrifugal blown trucks making less than 15 psi, select the 2 bar option. For trucks making 15-22 psi boost, select the 2.5 bar option. For roots/PD blown trucks, example Whipple, TVS, etc. Use MAF trigger.

Note: only modification needs the tank in the passenger rear of engine bay, so customers will need to extend the feed hose from tank to pump to get the pump by the sway bar.

Consult your tuner for his preference on trigger MAF vs MAP.

93 octane 10-14 PSI single M15 nozzle., 91 octane 10-14 psi 10+10 nozzle, 93 octane 14-22 PSI 10+10 or 10+15 As the boost and pressure goes up, so does the octane requirement.

Each kit is vehicle specific and will not fit any other application without major modifications. Instructions, tip sheets, and tech support are included.

Features
Progressive controller
2 Gallon vortech tank with a low level float switch
90 micron in line filter
Teflon lined stainless AN lines- no plastic pushlock lines in these kits!
Modified pump rated for 100% Methanol- Running 100% Methanol adds high Octane fuel as well as cooling the intake charge tremendously. Water / Methanol only cools. It does not add the necessary Octane for maximum power output.