TRE PERFORMANCE
About TREperformanceContact UsNewsPoliciesProject Cars
SHOP ONLINE
Air InductionBrakesClutch/FlywheelElectronicsEnginesExhaustFeatured ItemsFront End Accessory Drive SystemsFuel SystemInteriorOil SystemRear EndRotating AssemblySuperchargersTop End Engine kitsTuning ServicesTurbochargersValve CoversValvetrainGarage SaleCustomer RidesTRE Project Rides

Contact Us

1725 Monrovia Ave. STE D7 Costa Mesa, CA 92627
877-514-9494

Safe & Secure Shopping

Copyright © 2026 TRE Performance. All Rights Reserved. Powered by  Web Shop Manager.

tre-performance
About TREperformanceContact UsNewsPoliciesProject Cars
NEWSTRE PROJECT RIDESCUSTOMER RIDES
ContactPoliciesAbout UsFAQs

MY CART

YOUR CART IS EMPTY

Browse parts and accessories to get started.

tre-performance
The Racers Edge PerformanceSALES@TREPERFORMANCE.COM
760-586-5617
Cylinder Heads
Air Induction
Engines
Fuel System
Interior
Superchargers
Top End Engine kits
Cylinder Heads
Air Induction
Engines
Fuel System
Interior
Superchargers
Top End Engine kits
HOME / PRODUCT / Alky Control GM Truck 3-Gallon MAF Methanol Injection Kit
SaleAlky Control GM Truck 3-Gallon MAF Methanol Injection Kit

Alky Control GM Truck 3-Gallon MAF Methanol Injection Kit

SKU: ALKGMTK3MAF
$879.00$1,079.00
Loading options…

Description

Kit for the 1999-2007 GM truck using the washer tank. Includes new GM washer bottle with kit already modified. MAF trigger for PD blowers like the Whipple, Magnuson, etc. There are two variants on the pressure hoses used on the kit due to location of trucks throttle body. The standard kit hoses reach throttle body in center front of engine(stock location). The ext version includes a longer pressure hose to reach throttle body in passenger side of engine, example the older Whipple SC.

Note: On the 1999-2002 trucks GM used a different float type switch. The tank we supply supersedes the original ones on those trucks and you will need to get a new float switch for tank. On the 2002 and up, simply re-utilize your float switch. We sell the float switch separately in another listing. Also, if the truck is a base model Silverado, it may not have come from factory with a float switch/level indicator. You will need to purchase the float switch/indicator separately. Not sure, look on side of tank for a plug with wiring. Or call us. Note: There is an option for a vertical panel in the event truck is a 2WD and the cubby slot is open on the dash between the gauge cluster and drivers side AC vent. 4WD trucks will typically have controls in this slot of the dash, choose the Horizontal version.

Consult your tuner for his preference on trigger MAF vs MAP.

*Notice: If you are using 100% meth the pump should be rebuilt every 2 years, contact us for info.

93 octane 10-14 PSI single M15 nozzle., 91 octane 10-14 psi 10+10 nozzle, 93 octane 14-22 PSI 10+10 or 10+15 As the boost and pressure goes up, so does the octane requirement.


Each kit is vehicle specific and will not fit any other application without major modifications. Instructions, tip sheets, and tech support are included.

Features
Progressive controller
2 Gallon vortech tank with a low level float switch
90 micron in line filter
Teflon lined stainless AN lines- no plastic pushlock lines in these kits!
Modified pump rated for 100% Methanol- Running 100% Methanol adds high Octane fuel as well as cooling the intake charge tremendously. Water / Methanol only cools. It does not add the necessary Octane for maximum power output.

Tell a Friend

Your Name:
Product:Alky Control GM Truck 3-Gallon MAF Methanol Injection Kit

200 characters remaining