Alky Control Chevy Corvette C7 14-19 MAF Methanol Injection Kit

This is a Corvette 14-19 MAF trigger kit specifically made for the C7 Corvette application. This system uses the OEM washer tank as the methanol tank and triggers based on HZ readings from the Mass Air Flow sensor. Then increases drive to the pump as the frequency increases.

Consult your tuner for his preference on trigger MAF vs MAP.

*Notice: If you are using 100% meth the pump should be rebuilt every 2 years, contact us for info.

Will support 650 RWHP on a single nozzle M10 Kit. If you have an upper pulley, aftermarket exhaust, bolt-ons, and on 93 octane we recommend going with the single nozzle kit M15. This will support up to 700 RWHP. If you have a lower pulley, ported blower, 91 octane, etc.. we recommend going with the twin 10+10 kit for a 750 RWHP target. If you are on E85, have an upgraded supercharger, and need more fuel we recommend going with the twin 10+15, 15+15, or higher. 

Each kit is vehicle specific and will not fit any other application without major modifications. Instructions, tip sheets, and tech support are included.

Features
Progressive controller
90 micron in line filter
Teflon lined stainless AN lines- no plastic pushlock lines in these kits!
Modified pump rated for 100% Methanol- Running 100% Methanol adds high Octane fuel as well as cooling the intake charge tremendously. Water / Methanol only cools. It does not add the necessary Octane for maximum power output.
ALKY CONTROL is the only system recommended by A&A.