Aerospace Ford Mustang 2015-2021 4 Piston Pro-Lite Complete Drag Disc Brakes

This 5 lug complete drag disc brake kit includes Billet Aluminum 4 Piston Calipers, Billet Aluminum Mounting Brackets, Grade 8 Hardware, Billet Aluminum Hats, Bearings, Seals, Hawk Performance Brake Pads, 11 3/8 Diameter, 5/16 Thick Profiled, Lightened and Drilled Rotors, 1/2-20" X 2" Screw in Wheel Studs. This is the lightest weight, lowest drag brake kit available yet offers unsurpassed braking, direct bolt on and clears most 15" wheels!

Notes: For Drag Race Use Only (Not For Street Use), For Cars Under 3200lbs or heavier with use of a chute

This kit will drastically reduce the weight of your brakes and are worth at least 1/10 in the quarter, but are strictly for drag racing use because the rotors are not vented and will warp under street driving use. If you need brakes for street use, take a look at our Aerospace street brakes for your vehicle. These are the heavy duty brakes which Aerospace recommends for cars weighing Under 3200lbs or heavier with use of a chute. Get Rid of that bulky, heavy power brake booster and open up some room under that crowded hood. Retains Factory Brake Light Switch. Brake Lines: Both Front and Rear Brake hose kits are included in this package (our part number AC-5500 and AC-5501).

This kit does NOT include vented rotors standard, so you cannot use these brakes for street driving because it will warp the rotors.

Front Brake Kit Includes:
Billet Aluminum 4 Piston Calipers
Billet Aluminum Hats
Hawk Performance Brake Pads (We include the best possible compound brake pads for drag racing)
11 3/8 Diameter, 5/16 Thick Profiled, Lightened and Drilled Rotors
Billet Aluminum Mounting Brackets
Grade 8 Hardware
Meets All NHRA/ IHRA Requirements

Rear Brake Kit Includes:
Billet Aluminum Proprietary Direct Bolt One Custom Calipers
Billet Aluminum Brake Hats
11 3/4 Diameter 5/16 Thick, Lightened, profiled and Drilled Rotors
Grade 8 Hardware
Hawk Performance Brake Pads
Brake Kit Weighs 22 lbs
For Drag Racing Use Only
Designed for cars under 3300 lbs. or heavier with use of a parachute

Low Drag Hubs:
Billet Aluminum Hubs (2)
Has 4 1/2, 5 Lug Pattern
1/2-20" X 2" Screw in Wheel Studs
Low Drag Bearings
Screw on Nose Cap
Saves 2.5 lbs Per Side Compared to Stock
Can work with wheel speed sensor with modification

Fits:
2015-2021 Ford Mustang (will not fit with 4 bolt mount style hubs as featured on the GT350, GT500 , Magnaride or 2022 and up GT)

Manual Conversion Kit Include:
Master Cylinder Outlet Fittings
Billet Aluminum Master Cylinder Adapter Plate
Adjustable Master Cylinder Pushrod Kit
All required Hardware
Billet Aluminum Pedal Arm and Pedal Pad
Saves 6lbs Over Stock