This kit will drastically reduce the weight of your brakes and are worth at least 1/10 in the quarter, but are strictly for drag racing use because the rotors are not vented and will warp under street driving use. If you need brakes for street use, take a look at our Aerospace street brakes for your vehicle. These are the brakes which Aerospace recommends For Cars Under 3000lbs. When Measuring Axle Offset For C-Clip Eliminators Measure From Outside of Axle Flange To Backside Of C-Clip Eliminator Block And Then Add .250" (1/4)
This kit does NOT include vented rotors standard, so you cannot use these brakes for street driving because it will warp the rotors.
Brake Kit Includes:
Billet Aluminum 4 Piston Vented Rotor Calipers
Billet Aluminum Hats
Drilled For 5/8" Studs
4 1/2, 4 3/4, 5" Multi Drilled 5 Lug Patterns
Hawk Performance Brake Pads
11 3/4 Diameter, 13/16 Thick Vented Rotors
Billet Aluminum Mounting Brackets
Grade 8 Hardware
Dimpled and Slotted Rotors
No Parking Brake
Fits:
8.8 Ford Housing Ends With Aluminum Block Style C-Clip Eliminators and Factory Equipped ABS Rear End
Notes:
Fits 15" Wheels With a 13.600" Inside Diameter or Larger
